Image
Welcome Guest, • Login
RSS RSS

Navigation






Search the wiki
»

PoweredBy
This method of setting knives on a Yager and K2000 planer is about a simple as it gets.

Another knife setting method

Author unknown


Image

To adjust knives, lightly tighten so blade holds but slips. Put 1/16” acrylic sheet on table & raise so that roller springs are compressed at least 1/8”. Run knife roller backwards by hand to push blades into position. Tighten.

TAKE NO MORE THAN 1/16” PER PASS.

ScrewTurn Wiki version 3.0.5.600. Some of the icons created by FamFamFam.